Got yourself a GE universal remote, but having trouble getting that darn thing programmed cause you don’t have any codes for it?

The good news for ya is that you can program it without out codes.

And the even better news for ya is that we can help you out with getting that darn remote programmed.

Programming Methods

So, there’s three ways you program your GE Universal Remote without code: Auto Code Search Method, Number Search Method, and Brand Code Search Method.

And I’ll walk ya through each of them.

How To Program GE Universal Remote Without Code

Auto Code Search Method

This method is the easiest way to program your remote.

Follow these steps:

  1. Turn on the device you want to control with the remote.
  2. Press and hold the Setup button on the remote until the red LED turns on.
  3. Press the corresponding device button (like TV, DVD, or AUX).
  4. Keep pressing the Power button at regular intervals until the device turns off.
  5. Press down on that Setup button again to save the code.

Boom! Your remote is now programmed with the correct code for your device.

Number Search Method

This method helps you find a specific code for your device by entering numbers on the remote:

  1. Turn on the device you want to control.
  2. Press and hold the Setup button on the remote until the red LED turns on.
  3. Press the corresponding device button (like TV, DVD, or AUX).
  4. Enter one of the codes you found for your device, using the number pad on the remote.
  5. Press the Power button. If the device turns off, you’ve found the right code! If not, repeat steps 4 and 5 with other codes until you find the correct one.

Brand Code Search Method

This method involves using specific codes for brands.

Follow these steps:

  1. Turn on the device you want to control.
  2. Press and hold the Setup button on the remote until the red LED turns on.
  3. Press the corresponding device button (like TV, DVD, or AUX).
  4. Enter the first code for your device’s brand, found in the remote’s manual or online.
  5. Press the Power button. If the device turns off, you’ve found the right code! If not, repeat steps 4 and 5 with other brand codes until you find the correct one.

Entering and Saving Codes

When you’re setting up your GE Universal Remote without a code, one method is to manually enter and save the codes to control your device. 

Here’s the process divided into easy-to-follow steps:

Navigating Using LED Indicator Light

  1. Power up: Turn on the device you want to program.
  2. Select the device: On your GE Universal Remote, find and press the button that corresponds to the device type – like TV, DVD, etc. The LED indicator light should come on and stay on.
  3. Enter the magic mode: Press and hold the Code Search button – also called Setup on some remotes. The LED light will begin to blink, indicating it’s time to enter a code.
  4. Try some codes: Start entering the codes you found on the official brand website or from the list in the remote manual. The LED light will flash each time you press a button. After entering the correct code, the light should stay solid. If not, try more codes until you find the right one.
  5. Test it out: Aim the remote at the device and press the Power button or another function button – like Volume Up or Channel Up. If the device responds as expected, congratulations! You’ve successfully entered and saved a code.
  6. Saving the code: To ensure it’s saved, press and release the device button again. The LED light will blink twice, confirming that the code is locked in for future use.

GE Universal Remote Codes To Try

Here’s a few codes to try out on your remote:

  • 40081
  • 33709
  • SRP9263C
  • 48848
  • 34708
  • 33701
  • 41567
  • 40081
  • 48844
  • 37123
  • 44221
  • 33711
  • 349283
  • 34459
  • 44235
  • 46195
  • 40069
  • 37038

Troubleshooting and Support

Resetting and Pairing Remote

If your GE universal remote isn’t working as expected, try giving it a reset.

Here’s how you can do that:

  1. Remove the batteries and press every button on the remote
  2. Replace the batteries and turn on the device you want to pair
  3. Press down and hold the Setup button until the LED light blinks twice
  4. Press down on the corresponding device button (such as TV, DVD, etc.)
  5. Press down and hold the OK button until your device turns off

Now your GE universal remote should be reset and ready to pair again.

If you’re still having trouble, move on to the Common Issues and Solutions section.

Common Issues and Solutions

  1. Remote not working: Check the batteries and ensure they are properly inserted. It’s always a pretty good idea to try a fresh set as well.
  2. LED light not blinking: If the LED light on your remote isn’t blinking, it could be because of a faulty remote or dead batteries. Replacing the batteries should solve this issue.
  3. Pairing issues: If you’re unable to pair your remote even after following the resetting steps, try searching for your device’s code online using a search engine or refer to the manual that came with your GE universal remote. This way, you can input the correct code and pair successfully.
  4. Limited functionality: Sometimes, your remote may work but only have limited device control. Make sure that you’re using the correct code for your device. Also, remember that some buttons might not be compatible with your device.
  5. Remote stops working suddenly: If your remote was working fine and stops all of a sudden, try resetting and pairing it again. If that doesn’t work, check the batteries and replace them if needed.

If you’ve tried these troubleshooting tips and still can’t get your GE universal remote to work properly, it’s time to contact General Electric customer support.

They’ll be able to provide further assistance in resolving the issue.

Frequently Asked Questions

What’s the auto program procedure?

To auto program your GE Universal Remote, follow these steps: First, turn on the device you want to control.

Press and hold the “Setup” button on your remote until the LED light turns red.

Lastly, press the “Power” button and wait for your device to turn off, then release the button.

It will automatically search for the correct code.

How to find GE remote codes

If you need to find specific GE remote codes, you can check the manual that came with your remote or visit the GE Universal Remote code finder website.

Enter the device type and brand, and you’ll see a list of codes to try.

How to reset GE remote

To reset your GE remote, press and hold both the “Setup” and “Enter” buttons simultaneously until the remote’s LED light flashes twice.

This will reset your remote to its factory default settings.

What’s the GE remote Vizio setup?

For setting up a GE remote to control a Vizio device, first, find the appropriate code from the GE remote code list.

Then, press the “Setup” button followed by the code, and the LED light will confirm a successful setup.

How to program GE remote to TV

To program your GE remote to a TV, turn on the TV and press the “TV” button on your remote.

Press down and hold the “Setup” button until the LED light blinks twice.

Input the appropriate 4-digit code, and the LED will blink twice again if successful.

What are GE remote 4-digit codes

4-digit codes for GE remote can be found in your remote’s manual, or by visiting the GE remote code finder website.

You’ll need these codes when programming your remote for various devices.

Device-specific code lists can come in handy when setting up your remote.

Leave a Reply

Your email address will not be published. Required fields are marked *